We supplied and installed Classic Lift 2 post Hoists and 4 post Alignment hoist installation By Classic Lift Australia team, Thank you for choosing Classic Lift.
Author Archives: ClassicAdmin
05
Apr
Apr
Pre-installed Our shorter Length and Narrow Width 4 post hoist Classic CL3000-4P And delivered to the customer So he can use it in his new shed in the home GarageThese units fit perfectly into a standard 4m bay.
30
Dec
Dec
The procedure for arriving at the right and correct tensioning of the lifting cables is as follows: A) When the cables have been fitted to the carriage and 1 nut has been fitted to the thread this nut should be well above the bottom of the thread ( Approximately 10mm) This should be done to […]
04
Dec
Dec
This week Willunga Charter added one of our CLASSIC CL18TL-XL 18TONNE 4-Post EXTRA LONG Truck Hoists to their New Workshop equipment. The Classic CL18TL-XL EXTRA LONG Australia’s longest 4 Post Truck Hoist is newly engineered to accommodate Trucks and Heavy vehicles, built to last featuring upgrades to Safety, durability and productivity This lift IS Australia’s longest 4 Post Truck […]
13
Nov
Nov
Ascertaining the thickness and strength of concrete pads to house vehicle hoists is extremely important, the minimum thickness of the a concrete pad is 100mm, preferably 150mm would be ideal, Most concrete pads are equal in thickness over the entire area of the pad, therefore it is not necessary to drill exactly where the posts […]
19
Oct
Oct
Small workshop fitted out with our Classic CL4500XH Extra High 4.5 tonne 2 post hoist this gives great clearance for lifting large vans and 4×4 Vehicles with rooftop tents, in most cases, you can lift to full height before reaching the limit switch, installed by Classic Lift Australia Team.
21
Sep
Sep
Vehicle hoists must be inspected before use each day by the operator and Hoists must be regularly maintained by A competent person, as per AS/NZS 2550.9:1996 and manufacturer’s instructions The Hoists Inspection and maintenance records must be kept (ie. logbook) and when the hoists have a fault The Parts used to repair Hoists must be […]
26
Aug
Aug
Classic Lift Australia Team installed a Classic 4 Post Truck Hoist CL18TL-XL Extra Long, this 18 Tonne hoist is Australia’s longest 4 Post Truck Hoist with 10 tonne an air-operated jacking beam fitted, for a mechanical workshop in western Australia. With a working length of 10800 MM and a maximum lift capacity of 18 Tonne, […]
31
Jul
Jul
Automatic Tyre Changer machines OR LeverLess Tyre Changer or. What’s the difference and which you should choose? For a new Tyre Changer for your workshop? Not sure if you need a TYRE CHANGER LEVERLESS or with a Helper Arm the difference between each tyre Changers? Well, you have come to the right place. Classic Lift […]
19
Jun
Jun
If the concrete floor does not meet the required specifications, comply with WorkSafe. i.e thickness of the concrete and MPA (Mega Pascall) strength of the concrete. The following should be undertaken A) The two points where the posts will be positioned must be strengthened, the concrete needs to be cut and a new base poured, […]