The Classic alignment Scissor lift has a lifting height of over 1900mm so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full-frame under the scissor lift provides for maximum stability.
All Classic alignment scissor lifts can be surface mounted or flush-mounted. Each lift comes with approach ramps for the floor mounted application or an optional set of ramps if the customer decides to flush mount the lift. Check the technical specifications to better understand how the extra high lifting height allows the Px09A alignment scissor to be flush mounted and still offers plenty of room under the runways to properly access the underside of the vehicle.
• Dual synchronous cylinders are applied to assure the lifting level on both Platforms
• Electro-air control system, mechanical safety locks
• Skidproof diamond runway
• Integrated rear slip-plates
• Heavy-duty design, the X serial scissors lifts use 150 x75mmtube to make it strong and assure the runways remain level during working
- 1 Year Warranty on electrical and hydraulics including Hoist Rams / 5-year structural warranty.
- Registered with Worksafe
- Optional LED Lights
We have hydraulic oil in stock!
|Classic PX09A||Alignment Scissors Lift|
|Lifting Capacity||4000kg (9,000 lbs)|
|Lifting Time||55 Seconds|
|Overall Length(Inc. Ramps)||A 6364mm|
|Runway Length||B 4828mm|
|Overall Width||C 2190mm|
|Runway Width||D 625mm|
|Width Between Runway||E 855mm|
|Lifting Height||F 1870mm|
|Minimum Height||G 300mm|
|Max. Four Wheel Align||H 4070mm|
|Min. Four Wheel Align||I 2080mm|